|
|
|
|---|
 Microbe-Lift Ammonia Remover removes ammonia, chlorine and chloramines rapidly and completely when used as directed.
- MICROBE-LIFT/AMMONIA REMOVER gives beneficial bacteria time to multiply and recover if the biological filter gets damaged keeping pond fish from being stressed.
- Buffered to help prevent a drop in both alkalinity (acid-neutralizing capacity) and pH when used to remove very high levels of total ammonia.
- May be used at startup, when making water changes, replacing lost water due to evaporation or when your pond is overstocked with too many fish
- Neutralizes residual chlorine and destroys deadly chloramine
- Treats ammonia burn in pond fish
- Works immediately and will not interrupt biological filtration
Safe and Non-toxic to Humans, Plants, Birds and Aquatic Life
To remove and detoxify ammonia, chlorine and chloramines for water in ponds, add 1 teaspoonful of MICROBE-LIFT/Ammonia Remover per 15 gallons (57 L.) or 1 fl. oz. per 90 gallons of water.
To remove ammonia in existing ponds add 1 teaspoonful/15 gallons of MICROBE-LIFT/Ammonia Remover for each 1.0 mg/L., or fraction thereof, of measured total ammonia (=0.85 mg/L. total ammonia-nitrogen). To control ammonia when shipping fish or invertebrates use MICROBE-LIFT/Ammonia Remover at the standard dosage rate or increase (up to 10 times) if total ammonia levels are expected to be higher than 1.0 mg/L. It is recommended for routine shipping of fishes and invertebrates that trial static shipping tests be performed to determine the typical levels of total ammonia that will occur in untreated water.
Contradictions:
Do not use with permanganate or chlorite-based treatments. Nessler's total ammonia test kits will give false, high (or off-scale) readings. Winkler dissolved oxygen tests will give false, low or zero readings; use indigo-carmine dissolved oxygen tests or DO meters. For total ammonia testing use only salicylate-based (indole-phenol) tests.
MICROBE-LIFT/Ammonia Test Strips will function properly. The MICROBE-LIFT/ Ammonia Test Strips are salicylate-based and work well with this product.
16oz Bottle Treats up to 1,440 US Gallons
32oz Bottle Treats up to 2,880 US Gallons
1 Gallon Bottle Treats up to 11,520 US Gallons | | Item # | Description | Price | Add to Cart |
|---|
| AMRE16 | MicrobeLift - Ammonia Remover - 16oz Bottle | $13.95 | Add to Cart | | AMRE32 | 32 oz. MICROBE-LIFT Ammonia Remover | $20.95 | Add to Cart | | AMREGAL | 1 gal. MICROBE-LIFT Ammonia Remover | $59.95 | Add to Cart |
|
|
|---|
 MICROBE-LIFT/Dry Ammonia Remover contains ClorAm-X® patented molecule that will remove 1 ppm of ammonia with every dose. It is so safe it may be dosed up to 10x the standard dose with no toxicity. MICROBE-LIFT/Dry Ammonia Remover uses a PATENTED process that removes chlorine, DESTROYS chloramines and completely ELIMINATES the ammonia that is left behind when the chloramine bond is broken. Used by fish transporters worldwide. May be used for all fish intended for human consumption. May be used with marine invertebrates, fresh water invertebrates, crustaceans and mollusks. Water treated with Microbe-Lift Dry Ammonia Remover can not be accurately tested using Nessler’s type ammonia tests or winklers tests.
Please use salicylate test kits for detecting ammonia levels.
1 oz. of powder will remove 1 mg/L of total ammonia for 72+ hours! Suitable for shrimp, shellfish and fish intended for human consumption
- Can be combined with antibiotics and anesthetics
- Completely safe for biofilters
- Tested with shrimp, shellfish and aquatic invertebrate
- The ONLY ammonia remover that has an FDA letter of determination
- Can be used in any water temperature above 32 degrees F
- Has no smell and is colorless in solution
- Removes & Detoxifies: Ammonia, Chloramines & Chlorine
Directions:
For each measured, or anticipated, 1 mg/L total ammonia: 1 oz of ClorAm-X will treat 235 gals of water. It will remove 1 ppm of total ammonia, 3.2 ppm chloramines and 2.0 ppm chlorine.
1 oz. = Treats up to 235 Gallons
1 lb = Treats up to 3,760 Gallons
5 lb = Treats up to 18,800 Gallons
10 lb = Treats up to 37,600 Gallons
55 lb = Treats up to 206,800 Gallons
For total ammonia-nitrogen, multiply the above dosages by 0.8
55lb size does not qualify for free shipping, contact us for a shipping quote. If ordered online, shipping cost for this item will be added to your bill after approval from you. | | Item # | Description | Price | Add to Cart |
|---|
| DAR01 | Microbe-Lift Dry Ammonia Remover with Chlor-Am-X - 1 lb | $21.95 | Add to Cart | | DAR05 | Microbe-Lift Dry Ammonia Remover with Chlor-Am-X - 5 lb | $63.95 | Add to Cart | | DAR10 | Microbe-Lift Dry Ammonia Remover with Chlor-Am-X - 10 lb | $114.95 | Add to Cart | | DAR55 | Microbe-Lift Dry Ammonia Remover with Chlor-Am-X - 55 lb | $599.95 | Add to Cart |
|
|
|
1 gal. MICROBE-LIFT pH De... |
|---|
Safely LOWERS pH Levels
- Formulated in deionized water
- Includes 2 pH decrea...
|
Read more »»»
$50.95 (Buy Now)
|
|
1 gal. MICROBE-LIFT Ammon... |
|---|
Microbe-Lift Ammonia Remover removes ammonia, chlorine and chloramines rapidly and completely when used as dir... |
Read more »»»
$59.95 (Buy Now)
|
|
1 gal. MICROBE-LIFT Phosp... |
|---|
The Ultimate Phosphate Remover for Fresh Water
MICROBE-LIFT/POND PHOSPHATE REMOVER is a polymeric b... |
Read more »»»
$59.95 (Buy Now)
|
|
